Dead Car Battery Tricks To Revive Your Battery

If you are not keen on acquiring a new car battery, you can always recondition a dead car battery so that it regains functionality. Batteries tend to lose their strength over time due to normal wear and tie. Your battery can also die if it is left unused for a long period of time.

As batteries age, they usually tend to lose their ability to store charge and hence their functionality also minimizes. If you are facing this issue with your battery, you can return it to optimal functionality through a process known as reconditioning.

Dead batteries or batteries that are not functioning optimally pose risk to the car because they can bulge or even burst in extreme cases. However, through reconditioning, you can avoid frustrations such as being stranded or failure of your cars electronic system.

In this article, the discussion will feature a guide on how you can recondition a dead car battery, top reasons why you should recondition your battery, the dangers that can arise when you are reviving a dead battery and also maintenance tips to avoid diminished battery functionality.

Reasons Why You Should Consider Reconditioning Your Car Battery

1. To Avoid Hefty Expenses For A New Battery

Buying a new battery original and high-quality car battery can set you back financially. If your budget cannot support a new battery, you can avoid coughing up cash to buy a new car battery by reconditioning your dead battery so that it starts functioning optimally again.

2. Reconditioning A Battery Is More Convenient Than Buying A New One

Reviving a dead battery is an uncomplicated process that requires little time and effort. Instead of spending time and money looking for a new battery, you can follow the dead car battery tricks that will be discussed in the post to revive your old battery. It is also inexpensive to recondition a car battery.

3. Reconditioning A Dead Car Battery Is Good For The Environment

It is not easy to recycle discarded car batteries since they are non-biodegradable and cannot be converted into other gadgets. When you throw away a car battery, you are negatively affecting the environment. If you are looking to kill two birds with one stone (Protect the environment while avoiding the high purchase costs for a new battery), it is best to consider reconditioning the dead car battery you own.

A Guide On How To Revive A Dead Car Battery

There are many dead car battery tricks that you can use to rejuvenate an old and disused battery. This article will discuss one of the simplest reconditioning tricks that does not require a lot of technical know-how.

If you are looking to rejuvenate a dead car battery, you should:

1. Collect all the supplies you require to jump-start a dead battery.

If you want the reconditioning process to flow smoothly, you should ensure you have all the requisite tools needed for the rejuvenation at hand. If you attempt to revive a dead battery with the wrong tools and equipment, you can expose yourself to a lot of danger. Before beginning the rejuvenation process, ensure that you have the following:

  • A minimum of two large plastic containers
  • A tool kit containing different sizes of screw drivers
  • Safety gear such as gloves that cannot be corroded, a protective apron and googles
  • Baking soda
  • Epsom salt
  • Distilled water
  • A brush made of steel wire and a tooth brush
  • A Voltmeter
  • A battery charger

2. Prepare the dead battery for reconditioning.

Before starting the reconditioning process, ensure that you clean the outside of the battery. You should also clean the battery terminals such that they are not blocked by corrosion or any other material. Unclean terminals can cause a battery to have reduced functionality.

To ensure that the terminals get thoroughly cleaned, you should follow the following steps. First, mix the baking soda with distilled water until you get a paste. Apply the paste on the terminals of the battery and then scrub the terminals vigorously with the toothbrush. If you notice hard-to-remove corrosive material on the terminals, you can scrub them with the steel wire brush. Once you are done cleaning, wipe the terminals with a cloth and give them time to dry.

3. Check whether your dead battery can be rejuvenated.

Contrary to popular belief, not all dead batteries can be rejuvenated. There are some that are too far gone to be brought back to life. To know whether your battery can be rejuvenated, check the power reading it is producing with a voltmeter. If the battery does not give a reading, it cannot be reconditioned and you should start making plans on how to buy a new one immediately. However, if your battery gives a reading that is lower than 12.6 V, it means that it can be reconditioned.

4. Empty all the contents in your old battery.

Before unscrewing the battery caps so that you can get rid of the fluid in your battery, ensure that you wear protective gear so that you are protected in case there is any accidental spillage.

You should then empty the contents of the battery into one of the plastic containers you have. To neutralize the acidic contents of the liquid from the battery, add some baking soda to the mixture in the plastic container.

5. Clean the inside of the battery.

The next step in the reconditioning process is to clean the cells of your battery. To do this, mix half a pound of baking soda with a half-gallon of distilled water vigorously. You should then pour this mixture into all the cells of the battery, screw the caps on and shake the battery vigorously.

After shaking your battery vigorously for some time, you can then pour the contents into a plastic container. Repeat this process until you are sure the battery is clean. When the cells become clean, your old battery is now ready for reconditioning.

After you are done with the reconditioning process, ensure that you dispose the waste from the cleaning process properly.

6. Rejuvenate your battery.

In order to rejuvenate your battery, you have to add a new electrolyte. To get the electrolyte, boil half a gallon of distilled water and add a half pound of Epsom salt as you stir the mixture carefully.

Using a funnel, pour the resulting mixture into all the cells of the battery until they are filled to maximum capacity. You should the return all screw caps on the battery and shake your battery a few times.

The electrolyte that you add usually helps to stop the sulphating process in the cells, increases the power capacity of the battery and also increases the total power output of the battery.

7. Charge your reconditioned car battery.

The next step is to charge your reconditioned process. Before beginning the charging, remove the caps on the battery so that the electrolyte does not overheat. Ideally, you should ensure you charge a reconditioned battery for at least a day.

To avoid overcharging the reconditioned battery, check the power levels regularly. You can take your battery out of the charger once it hits 12.43 V. At this point, you can now use the reconditioned battery.

Risks Associated With Reconditioning An Old Battery

There is always the risk that you will get injured by battery acid. You can avoid injuries by only starting the reconditioning process after wearing full protective gear.

You should also follow the reconditioning guide carefully. If you do not do the reconditioning process properly, there is always the risk that the battery will explode.

Before using any dead car battery tricks, check to see if your battery has any physical defects. If you notice leakages or cracks, DO NOT attempt to reconditioning the battery. Instead, dispose the faulty battery safely. If you try to reconditioning a damaged battery, the results can be disastrous.

If you are not sure that you can effectively handle the reconditioning process, either buy another battery or get a professional to recondition your battery for you. Remember that if you do this process improperly, you are exposing yourself and other people in the vicinity to a lot of danger.

Tips On How To Maintain Optimal Functionality In A Reconditioned Battery

After carrying out the reconditioning process through one of the many dead car battery tricks, you can ensure that your battery retains optimal performance by doing the following:

  • Ensure that you clean the terminals of the battery on a regular basis since with time, acid tends to cover the terminals hence lowering the functionality of your battery. When cleaning the terminals, use a paste of baking soda and a hard wire brush. Also ensure you clean the connectors
  • For your battery to function optimally, ensure that you check water levels in the battery regularly. Should you notice that the water level has gone down, top up with distilled water until the battery gets full
  • Get an insulation cover for your battery to protect it from damage, debris and overheating

In conclusion, remember that reconditioning a dead battery is only a temporary solution. Even after reconditioning, your battery will not gain full functionality. Therefore, start setting aside funds to buy a new battery.

Leave a reply

Your email address will not be published. Required fields are marked *

Your comment:

Your name: